Conveniently secures your Featherweight GPS and battery with this high impact, temperature resistent sled.
Designed around the popular SparkFun available here:
This sled is compatible with our line of mounting products including the 38 mm Nosecone bulkhead, bulkhead spacer and 1/4-20 stainless steel eyebolts. Please note protective sleeves for shockcord attachment are tracking sled specific, and not compatible with different sled types. The sleeve will require the use of an extension cable for battery hookup due to clearance issues with the stock connector. A suitable cable will be provided with each sleeve, but you must check the polarity carefully when connecting to the tracker.
The 38 Nosecone Mounting System and Featherweight Tracker Sled have been shown to be compatible with Madcow/Rocketry Warehouse 38 mm filament wound VK nosecones, as well as, the Wildman/CTI 38 mm injection molded fiberglass nosecone. NOTE: this bulkhead is intended for standard thickness coupler tubing, not thin wall. If you have a different 38 mm nosecone you would like to try this in contact us for a no-risk trial.
The BT60 bulkhead is compatible with the Mach 1 Rocketry Fiberglass Nose Cone only. It is not designed to fit any other BT60 nosecone properly.
Save money on your mounting accessories by ordering them now as one of the available mounting packages. All sled and mounting options come with necessary screws, but not eyebolts. Compatible eyebolts may be purchased separately in our store.
Tracker Sled (Featherweight)
Printed from a professional grade PETG plastic with a high Tg (Glass transition) of 76 deg C (169 deg F), so it will hold up to the most extreme flying site conditions. All parts are solid (100% infill), so no internal voids or honeycombs.
Every item sold carries a 1 year replacement guarantee against defect or severe damage arising from normal use. If your Lab Rat Rocketry product suffers damage during normal use (including nominal flight and recovery) then contact us via email for a replacement. Please provide as many details as possible in your message, including pictures of the damage.
Additionally, there is value in damage reports from non-nominal recoveries that result in damage. If this occurs please contact us via email with as much detail as you can provide, including pictures of the damage, and we may provide a discounted replacement. These special instances will be decided on a case-by-case basis, and this should not be taken as a guarantee of replacement for damage arising from abnormal use, including non-nominal recovery or damage as a result of cato.
This guarantee applies only to the parts supplied by Lab Rat Rocketry, and does not extend to the electronics or any other part of the rocket.