Sold as set of 2 connectors.
Designed by rocketeers specifically for the demands of high powered rockets.
Compact design with secure wire capture, and low profile ejection side connector. Simply drill a 7/64 in hole in your bulkhead, and screw on the connector. Sturdy and removable to aid in cleaning.
Currently available to fit 1/8", 3/16", 1/4" and 12 mm NON-CONDUCTIVE bulkheads. The 12 mm version is intended for use with plywood bulkheads, and includes two stainless steel washers. 1/4" Plywood connectors also includes two stainless steel washers.
The 12 mm version is verified for use with a double layer of LOC 1/4" (6 mm) plywood. Manufacturers have slightly different thicknesses of what they refer to as 1/4" and 1/2" plywood. If you are unsure which you have, then measure your bulkhead. If you have true 1/2" (12.7 mm) plywood we can help with that too as a custom order.
DO NOT OVERTIGHTEN. Damage due to overtightening is not covered under product guarantee.
Premium Electrical Connectors (set of 2)
Every item sold carries a 1 year replacement guarantee against defect or severe damage arising from normal use. If your Lab Rat Rocketry, LLC product suffers damage during normal use (including nominal flight and recovery) then contact us via email for a replacement. Please provide as many details as possible in your message, including pictures of the damage.
Additionally, there is value in damage reports from non-nominal recoveries that result in damage. If this occurs please contact us via email with as much detail as you can provide, including pictures of the damage, and we may provide a discounted replacement. These special instances will be decided on a case-by-case basis, and this should not be taken as a guarantee of replacement for damage arising from abnormal use, including non-nominal recovery or damage as a result of cato.This guarantee applies only to the parts supplied by Lab Rat Rocketry, LLC and does not extend to the electronics or any other part of the rocket.