The triple pull pin switch kit includes everything you need to mount and use the switches, except the wire of your choosing. The pin can be threaded from either side, and both ends of the bracket are tapered to make it easier to insert the pin should you need to stand down on the pad.
Bracket width is just under 3 inches
(3) Omron SS-5GL Switch (terminal length may vary, shorter shown)
Triple Switch Bracket/Pin Aligner
4" Stainless Steel Pin with High Visibility Cap
(6) 2-56 3/4" machine screws
(6) 2-56 nylon lock nuts
Optional Upgrade the 4" Stainless Steel Pin to a like pin with "Remove Before Flight" Flag
Triple Pull Pin Switch Kit
Best Safety Practice: When using the pull-pin switch it is possible for you, or another person (such as the RSO) to accidentally pull the pin thereby activating your electronics. Therefore, we recommend placing a piece of masking tape over the end of the pin to prevent accidental removal.
Printed from a professional grade PETG plastic with a high Tg (Glass transition) of 76 deg C (169 deg F), so it will hold up to the most extreme flying site conditions. All parts are solid (100% infill), so no internal voids or honeycombs.